Emotion

Mistral Emotion - Raceboard| racing board

A proven race winning shape and fast cruising board the Emotion’s 14’ race legal length and fast lines, will get you moving quickly along. Marginally widened tail allow for step back turns and the US fin box permits you to fit a high-performance race fin.

  • Length
  • Width
  • Thickness
  • Weight
  • Liters
  • Buoyancy
  • 427
  • 71
  • 15
  • 9.80 kg
  • 339
  • 150
  • Length: 427
  • Width: 71
  • Thickness: 15
  • Weight: 9.80 kg
  • Liters: 339

SUP technology has advanced over the years, however require the end-user to take good care through responsible ownership. The advantages of iSUP ownership are clearly related to convenience of transportation and storage, cost and low impact use.

  • Rinse salt water from board after use with fresh
  • Towel or air dry before stowage
  • Do not drag over rough surfaces
  • Store out of strong UV
  • Do not store in a humid place
  • Avoid sand falling into the valve
  • Do not over inflate
  • Inflate within (-) 2 psi of recommendation
  • Do not store fully inflated
  • Reduce to 5psi if storing inflated
  • Do not store when wet
  • Fold neatly avoiding fin box

If you’re getting your iSUP out of storage after a long winter, it’s advised you take some time to do some basic maintenance checks at home.

  • Inflate to recommended PSI
  • If stored deflated check fold lines are OK
  • Make a close inspection of the seams for any leaks
  • Do same with the valve and re-tighten using the valve spanner
  • Check fin box and fin fitment
  • Check D-Ring connections
  • Check deck pad
  • Check for any discolouration due to bacteria
  • Wash and scrub board with cool soapy water
  • Observe for any ‘bubbling’ caused by leaks
  • Make a note of PSI and leave for 48hrs
  • Check PSI and note any lose of pressure
  • Investigate any issues and address / fix
  • For minor none seam leak issues fix using repair kit
  • Seam failure often requires professional input
  • Consider contacting inflatable boat repairers
Repair kit includes
PVC patches, PVC contact glue, valve spanner.