La Bamba inflatable sup combo set

recreation, kids board

La Bamba is one of our fun recreational boards. A front cargo net allows you to carry accessories and a bow scuff pad protects from scuff damage when beaching. Stable, nimble and fun to paddle. Includes coiled leash and paddle with polycarbonate blade and alloy adjustable shaft, dual action pump, fin, coiled leash, repair kit and wheeled travel bag. Incorporates advanced 4.75” / 12cm deck to hull DSFL material which provides some unique convenience and performance features.

  • Length
  • Width
  • Thickness
  • Weight
  • Liters
  • Buoyancy
  • 320
  • 78
  • 12
  • +- 7.5 kg
  • 200
  • < 100
  • Length: 320
  • Width: 78
  • Thickness: 12
  • Weight: +- 7.5 kg
  • Liters: 200

You are a novice to intermediate

The Mistral La Bamba 10’ x 31” x 4.75” (320cm x 78cm x 12cm) x 200L inflatable SUP offers smooth paddling and stability and suits novice to intermediate paddlers. With 200L La Bamba can support riders up to 100kg, but optimally sub 100kg for better performance.

Product composition and construction
Double Skin Fusion Layer (DSFL) Technology Drop Stitch Fabric. Uses 13,600 stitches per inch over the usual 12,000 making the board stiffer for no added weight gain. SUP board consists of polyvinyl chloride (PVC) woven polyester drop stitch construction. Non-slip material is composed of ethylene-vinyl acetate (EVA) foam. Contact adhesive consisting of poly-chloroprene polymers. Elastic bungee cord composed of both natural and manufactured rubber, poly carbonate fin-box, stainless steel retainers.

La Bamba is 4.74” / 12cm deck to hull in thickness, providing unique advantages over 6” / 15cm thick boards, namely; your centre of gravity is lowered improving your ability to balance, windage is lowered making the board more manageable in winds, the board is less ‘corky’ on account of lowered volume and reduced height above the water, inflation and deflation time is reduced, folding time is reduced and easier, a light board is made possible, stowage volume is reduced and less material is used in the manufacturing.

Stock advice
Avoid storing in direct high UV sunlight to prolong material longevity. Rinse with fresh water to evacuate all salt crystals. When dry, store in dry, well ventilated place avoid humid heat sources.

Tests
Developed and tested by our design team in Holland and the UK. Components have been tested to ensure they meet nominal expectations of performance within reasonable expectations of form, function and budget.

SUP technology has advanced over the years, however require the end-user to take good care through responsible ownership. The advantages of iSUP ownership are clearly related to convenience of transportation and storage, cost and low impact use.

  • Rinse salt water from board after use with fresh
  • Towel or air dry before stowage
  • Do not drag over rough surfaces
  • Store out of strong UV
  • Do not store in a humid place
  • Avoid sand falling into the valve
  • Do not over inflate
  • Inflate within (-) 2 psi of recommendation
  • Do not store fully inflated
  • Reduce to 5psi if storing inflated
  • Do not store when wet
  • Fold neatly avoiding fin box

If you’re getting your iSUP out of storage after a long winter, it’s advised you take some time to do some basic maintenance checks at home.

  • Inflate to recommended PSI
  • If stored deflated check fold lines are OK
  • Make a close inspection of the seams for any leaks
  • Do same with the valve and re-tighten using the valve spanner
  • Check fin box and fin fitment
  • Check D-Ring connections
  • Check deck pad
  • Check for any discolouration due to bacteria
  • Wash and scrub board with cool soapy water
  • Observe for any ‘bubbling’ caused by leaks
  • Make a note of PSI and leave for 48hrs
  • Check PSI and note any lose of pressure
  • Investigate any issues and address / fix
  • For minor none seam leak issues fix using repair kit
  • Seam failure often requires professional input
  • Consider contacting inflatable boat repairers