M-glide inflatable sup board

race, touring cruising board

The M-Glide 14’ has a unique inflatable SUP shape incorporating a pin tail line into a squash tail improving speed by reducing drag. Add to this the needle nose shape and you have a speedster capable of hitting high speeds. Whether fast touring, racing in the 14’ division or used as a travelling training companion, the M-Glide delivers speed and long glides. A single Universal Fin Box permits you to fit a race pedigree fin of your choice. Side grab handles for Le Mans starts and front mounted cargo net, bring this racy board together in one neat package. A bow scuff pad protects from shoreline or object impacts. Incorporates DSFL material providing some unique benefits.

Length
Width
Thickness
Weight
Liters
Buoyancy

426
66
15.2
+- 9.5 kg
290
< 100

Length: 426
Width: 66
Thickness: 15.2
Weight: +- 9.5 kg
Liters: 290

Double Skin Fusion Layer Drop Stitch
Genuine 13,000 threads per inch
2,600 more threads than conventional
Universal fin box for fitting of race fins Sleek design shape
Low drag for long glides
EVA diamond pattern non-slip pad
Bow protector
Towing D-Ring
Carry Handle
Repair kit
Dual action pump
Fin included
Wheeled travel bag

You are an intermediate to advanced paddler
The Mistral M-GIide, 14’ x 26” x 6” (426cm x 66cm x 15cm) x 280L inflatable SUP is specifically designed for speed and long glides. Offers ample stability for the intermediate to advanced paddler. Can support riders up to 100kg; performs optimally up to 85kg body weight.

Product composition and construction
Double Skin Fusion Layer (DSFL) Technology Drop Stitch Fabric. Uses 13,600 stitches per inch over the usual 12,000 making the board stiffer for no added weight gain. SUP board consists of polyvinyl chloride (PVC) woven polyester drop stitch construction. Non-slip material is composed of ethylene-vinyl acetate (EVA) foam. Contact adhesive consisting of poly-chloroprene polymers. Elastic bungee cord composed of both natural and manufactured rubber, poly carbonate fin-box, stainless steel retainers.
Stock advice
Stock advice
Avoid storing in direct high UV sunlight to prolong material longevity. Rinse with fresh water to evacuate all salt crystals. When dry, store in dry, well ventilated place avoid humid heat sources.
Stock advice
Tests
Developed and tested by our design team in Holland and the UK. Components have been tested to ensure they meet nominal expectations of performance within reasonable expectations of form, function and budget.

SUP technology has advanced over the years, however require the end-user to take good care through responsible ownership. The advantages of iSUP ownership are clearly related to convenience of transportation and storage, cost and low impact use.

Rinse salt water from board after use with fresh
Towel or air dry before stowage
Do not drag over rough surfaces
Store out of strong UV
Do not store in a humid place
Avoid sand falling into the valve
Do not over inflate
Inflate within (-) 2 psi of recommendation
Do not store fully inflated
Reduce to 5psi if storing inflated
Do not store when wet
Fold neatly avoiding fin box

If you’re getting your iSUP out of storage after a long winter, it’s advised you take some time to do some basic maintenance checks at home.

Inflate to recommended PSI
If stored deflated check fold lines are OK
Make a close inspection of the seams for any leaks
Do same with the valve and re-tighten using the valve spanner
Check fin box and fin fitment
Check D-Ring connections
Check deck pad
Check for any discolouration due to bacteria
Wash and scrub board with cool soapy water
Observe for any ‘bubbling’ caused by leaks
Make a note of PSI and leave for 48hrs
Check PSI and note any lose of pressure
Investigate any issues and address / fix
For minor none seam leak issues fix using repair kit
Seam failure often requires professional input
Consider contacting inflatable boat repairers