Pampero 11’5 Inflatable WindSUP Combo (Blue/White) V1.0

fun paddling

Pampero 11’5 Inflatable WindSUP Combo (Blue/White) V1.0

fun paddling

 449,00 inc VAT

The Pampero is designed as our specific WindSUP all-rounder with the focus on multi functionality. An 8mm deck thread permits the addition of a windsurfing rig and a centre middle US box, means you can improve your upwind performance. As a SUP board the Pampero length and width provides ample speed and stability for short coastal touring or inland waterway meandering.

 

INCLUDES

  • SUP Board
  • Fin
  • Dual-action pump
  • Bag
  • Repair kit

Out of stock

SKU: 111950115 Category:

Description

The cargo net provides plenty of capacity to carry a variety of items. We’ve designed a 4.5 complete travel rig, an optional larger 5.5m sail and a 3m kids travel rig to accompany the Pampero. Incorporates DSFL material providing some unique benefits.

SUP technology has advanced over the years, however require the end-user to take good care through responsible ownership. The advantages of iSUP ownership are clearly related to convenience of transportation and storage, cost and low impact use.

  • Rinse salt water from board after use with fresh
  • Towel or air dry before stowage
  • Do not drag over rough surfaces
  • Store out of strong UV
  • Do not store in a humid place
  • Avoid sand falling into the valve
  • Do not over inflate
  • Inflate within (-) 2 psi of recommendation
  • Do not store fully inflated
  • Reduce to 5psi if storing inflated
  • Do not store when wet
  • Fold neatly avoiding fin box

YOU ARE A NOVICE TO ADVANCED PADDLER

The Mistral Pampero 11’5 x 31” x 6” (350cm x 78cm x 15cm) x 316L inflatable SUP is a true WindSUP specific board for both paddling and windsurfing. Can support riders up to 120kg. Performs optimally for riders between 75 and 100kg.

 

PRODUCT COMPOSITION and CONSTRUCTION

Double Skin Fusion Layer (DSFL) Technology Drop Stitch Fabric. Uses 13,600 stitches per m2 over the usual 12,000 making the board stiffer for no added weight gain. SUP board consists of polyvinyl chloride (PVC) woven polyester drop stitch construction. Non-slip material is composed of ethylene-vinyl acetate (EVA) foam. Contact adhesive consisting of poly-chloroprene polymers. Elastic bungee cord composed of both natural and manufactured rubber, poly carbonate fin-box, stainless steel retainers.

 

STOCK ADVICE

Avoid storing in direct high UV sunlight to prolong material longevity. Rinse with fresh water to evacuate all salt crystals. When dry, store in dry, well ventilated place avoid humid heat sources.

 

TESTS

Developed and tested by our design team in Holland and the UK. Components have been tested to ensure they meet nominal expectations of performance within reasonable expectations of form, function and budget.

If you’re getting your iSUP out of storage after a long winter, it’s advised you take some time to do some basic maintenance checks at home.

  • Inflate to recommended PSI
  • If stored deflated check fold lines are OK
  • Make a close inspection of the seams for any leaks
  • Do same with the valve and re-tighten using the valve spanner
  • Check fin box and fin fitment
  • Check D-Ring connections
  • Check deck pad
  • Check for any discolouration due to bacteria
  • Wash and scrub board with cool soapy water
  • Observe for any ‘bubbling’ caused by leaks
  • Make a note of PSI and leave for 48hrs
  • Check PSI and note any lose of pressure
  • Investigate any issues and address / fix
  • For minor none seam leak issues fix using repair kit
  • Seam failure often requires professional input
  • Consider contacting inflatable boat repairers