0
Product in stock

Adventure. 11.5 2020

Mistral Adventure Inflatable SUP| recreation board

Our Adventure board is another of our super value, high quality inflatables. Includes 2 x moulded side bite fins for added directional stability and a single universal standard fin box. An 8” fin is provided as part of the package. A Large cargo netting permits securement of accessories and a unique printed M embossed deck print, provides added grip and foot comfort. The longer board at 11’5 will tend to be slightly faster while the shorter variation more nimble. Constructed using our Fusion Layer Technology to maximise durability and minimise weight, the Adventure boards are complete with high quality travel bag, pump and repair kit.

  • Length
  • Width
  • Thickness
  • Weight
  • Liters
  • Buoyancy
  • 11'5"
  • 31"
  • 6"
  • 8 kg
  • 310
  • 150
  • Length: 11'5"
  • Width: 31"
  • Thickness: 6"
  • Weight: 8 kg
  • Liters: 310

SUP technology has advanced over the years, however require the end-user to take good care through responsible ownership. The advantages of iSUP ownership are clearly related to convenience of transportation and storage, cost and low impact use.

  • Rinse salt water from board after use with fresh
  • Towel or air dry before stowage
  • Do not drag over rough surfaces
  • Store out of strong UV
  • Do not store in a humid place
  • Avoid sand falling into the valve
  • Do not over inflate
  • Inflate within (-) 2 psi of recommendation
  • Do not store fully inflated
  • Reduce to 5psi if storing inflated
  • Do not store when wet
  • Fold neatly avoiding fin box

If you’re getting your iSUP out of storage after a long winter, it’s advised you take some time to do some basic maintenance checks at home.

  • Inflate to recommended PSI
  • If stored deflated check fold lines are OK
  • Make a close inspection of the seams for any leaks
  • Do same with the valve and re-tighten using the valve spanner
  • Check fin box and fin fitment
  • Check D-Ring connections
  • Check deck pad
  • Check for any discolouration due to bacteria
  • Wash and scrub board with cool soapy water
  • Observe for any ‘bubbling’ caused by leaks
  • Make a note of PSI and leave for 48hrs
  • Check PSI and note any lose of pressure
  • Investigate any issues and address / fix
  • For minor none seam leak issues fix using repair kit
  • Seam failure often requires professional input
  • Consider contacting inflatable boat repairers