Home

Skywave Club Air 7'0

Windsurfing for kids or learning wingsurfing in preparation for wingfoiling, or as a stand-alone board for schools.

€900.00
Description

Ideal inflatable kids windsurfing board or trainer wingsurfing board for learning the art of handling the wing and learning new skills. It features side bites and a single rear fin.

Included equipment
  • Bag description 100 x 90 x 20 cm. Wide soft handles, strongly reinforced handle straps, netting on the front side, 2-way zipper on top, straps with an adjuster buckle on top, fin pocket inside with velcro closure, pocket for paddle inside with velcro closure, strap with velcro closure to hold repair ki.t
  • Paddle A three-piece adjustable paddle composed of a carbon composite shaft (30% Carbon / 70% GRP) is included for an improved paddling experience. The hard-wearing polycarbonate blade is shaped to deliver maximum grip in the water.
  • Leash The 10' coiled safety leash provided attaches to the rear deck D-ring, the padded cuff fitting below the knee or around the ankle. It is intended for flat, still waters only. For other water environments, seek professional advice.
  • Fin 3 x Mistral-designed blue silver tip polycarbonate 8" high-performance fins with just enough rake to keep it weed-free while maintaining efficient lateral stability. Also included 2 x spare fin screws and a plate for securing the fin.
  • Pump Our dual-action pump, set to dual-action, inflates on both up and down strokes. Use for the first 5-6psi of inflation. Set to single-action; air enters on the down stroke only. A pressure gauge indicates internal pressure. 61.5 x 26 x 7.55.
  • Repair Kit Includes PVC patches (use marine PVC contact glue) for simple repairs. Semi-inflate the board, clean the area with acetone, sand with 150 grit paper, apply contact glue evenly to the patch and board, apply the patch applying pressure, and leave for 24 hours.
Features
  • Deck Pad Smooth skin EVA
  • Kick Tail Raised high-grip diamond pattern EVA step back pad
  • Windsup 8mm deck thread for Windsurfing rig.
  • Bow Scuff Nose scuff-pad located under bow, protects from impact, scuffing and abrasion. Constructed from heavy duty polycarbonate. Incorporates stainless steel towing and mooring D-Ring for convenience and safety.
  • Handle Central carry handle, positioned for balanced control in low or higher winds. Features soft, wide, webbing, neoprene covered for added finger carrying comfort and improved control.
  • Valve 60psi rated H4 style
  • Base Material PVC
  • Box Type US Box x 3. Rear centre and x 2 side bites.
  • Deck Profile Flat
  • Rail Profile Features our fast-flow hard edged rear tail and side system to improve water release, lessen drag, improve control.
  • Tail Profile Square
  • U/Joint Fitting 8mm thread for windsurfing UJ
  • Handle Design Webbing
Rider
  • Level Beginner
Materials, care & storage
  • Material Description Premium Twine-X® dual layer PVC, fused into a thin single layer, drop stitched with15,000 woven polyester threads/m2. EVA foam decking, marine stainless D-rings, polycarbonate fin box, elastic cargo strapping.
  • Care Inspect seams regularly, carry out repairs using repair kit provided. Tighten valve using spanner supplied if leaking air. Remove stubborn marks with white spirit or PVC cleaner. Do not use abrasive creams or pads. Avoid prolonged strong UV exposure.
  • Storage Deflated; Remove fin, rinse board with fresh water, towel or air dry. Deflate and fold neatly, place in bag, store indoors in dry, well ventilated space. Avoid humid heat sources. Inflated: repeat all steps, partially deflate to 8psi.
Attributes
  • Supboard type Surfing, WingSUP
  • Color Red
Dimensions
Board Length Board Width Board Thickness
7'0 32" 6"
Volume
  • Board Volume (L) 210